Evaporator Unit

Compact EBE split evaporators for boats are draw-through, ductable cooling units with reverse cycle heating. Featuring a rotatable, high-efficiency blower in which the motor is concealed to save space.
  • Space-saving
  • Flexible
    Rotating blower
  • Reduced noise : 9108690472 Visit support page + FAQ
The Dometic EBE is designed for installation low in a cupboard, closet, cabinet or other enclosed space, with discharge air ducted to one or more grilles high in the cabin. EBE units can be used with a combination of plenums and flexible duct, or built-in ductwork may be used.
...and more
    • Compact ductable cooling or heating units save space
    • Rotating blower allows you to direct the airflow as needed
    • Vibration-isolation mounting reduces noise and vibration
    • Insulated condensate pan with anti-slosh, anti-fungal foam lining
    • High-efficiency evaporator coil
    • Available with electric heat (Dometic EBHE models)
    • Designed to be used with Emerald series R-410A condensers

The new standard in high-performance evaporators

The Dometic EBE 30,000 BTU/h - 208-230 V/50-60 Hz/1-Ph is designed for installation low in a closet, cabinet, or other enclosed space, with discharge air ducted to one or more grilles high in the cabin. Vibration-isolation mounting is built into each EBE unit to reduce noise and vibration. The PSC blower is supported by a sturdy aluminum bracket with isolation grommets to reduce noise and vibration. The blower's internal motor housing reduces the overall unit depth for easier installation and promotes quiet operation. The drain pan and blower housing are covered with insulating foam which further reduces noise and secondary condensation. The "positive flow" drain pan has an anti-slosh, antifungal foam lining. Two 1/2 in. (13 mm) drains are located on the blower side of the drain pan to effectively removely condensate.


SKU number 9108690472 
Model EVAPS EBE Series 
Model on label EBE30-230V 10"MR 
Product Description Evaporator Unit 
Dimensions product depth 381 mm
Dimensions product height 559 mm
Dimensions product width 528 mm
Net weight 16.33 kg
Input voltage (AC) 230 V
Input frequency 50/60 Hz
Required AC circuit protection min 3.00 A
Required AC circuit protection max 5.00 A
Cooling capacity (ISO 5151) 30000 W
Current consumption max cooling 1.70 A
Dimensions parcel depth 559 mm
Dimensions parcel height 711 mm
Dimensions parcel width 635 mm
Parcel weight 19.05 kg