Air Conditioners for Marine

Air Conditioners for Marine
Turbo Series

Self-Contained Air Conditioning

Turbo Series
Powerful, quiet and compact with no drain pan worries, the Turbo revolutionized self-contained marine air conditioning with patented innovations.
  • Available in 230V 50Hz, 230V 60Hz, 115V 60Hz
  • Up to 21 % increased cooling capacity and up to 27 % more energy efficient
  • Designed from the inside out with multiple patented innovations
  • Compact design uses less space
  • Vibration-isolation mounts reduce noise and vibration
  • Rust-free composite drain pan
  • Engineered to maximize the performance of R-410A refrigerant
  • Compact design reduces unit size by up to 25% of the original Vector Rotary's size
  • High-velocity (HV) fully-insulated blowers are rotatable
  • Engineered to maximize the performance of R-410A, an environmentally safe refrigerant
  • Unique compressor and reversing valve mounting reduces vibration
  • Electrical box is installed within unit footprint on 18K and 27K models; remotely mounted for 30K models
  • High-efficiency rotary and scroll compressors are quiet and more reliable
  • Condenser coil's cupronickel-encased copper condenser coil provides maximum heat transfer and high resistance to corrosion
MCGX

Modular Titanium Chillers

MCGX
Featuring a compact base design, these modules can be staged to provide a larger system which is easily retrofitted and staged in the field. Unaffected by vibration, moisture or ambient temperatures up to 140 °F/60 °C, these condensing units can be installed in any convenient location.
  • Available in 230V 50 Hz, 230V 60Hz, 400V 50Hz 3PH, 400V 60 Hz 3 PH
  • Titanium condenser dramatically increases product lifespan
  • Up to six modules can be staged
  • Hermetically sealed and pre-charged with R-410A refrigerant
  • Features freeze controls, high-limit switches, high and low aquastats and timers
  • Unaffected by vibration, moisture or ambient temperatures up to 140 °F/60 °C
  • Monitored and protected by Dometic’s exclusive Digital Diagnostic Controller (DDC)
EMERALD Series

Split Gas Air Conditioning - Condensing Units

EMERALD Series
This condenser has reversing valve, pressure switches, and service ports centrally located for easy maintenance access from any side. Vibration-isolating compressor mounting system reduces noise and vibration. Pair this with a Dometic Emerald R410-A evaporator.
  • Available in 230V, 50Hz, 230V 60 Hz and 380V 50Hz 3PH
  • Split-gas system confines compressor noise to the engine room and places quiet evaporating units in living areas
  • Square chassis for easy installation in tight spaces. Reversing valve, pressure switches, and service ports centrally located for easy maintenance access from any side
  • Rust-free composite drain pan
  • Reconfigurable chassis allows optimal drain connections
  • Compressor vibration-isolation mounts minimize noise and vibration
  • Built-in refrigerant line filter drier reduces installation time and protects the compressor from moisture and contaminants
ECD Series

Self-Contained Air Conditioning

ECD Series
Designed as a DIY drop-in replacement, value-priced EnviroComfort retrofit kits provide 6,000, 10,000 or 16,000 BTUs of cooling and heating. Complete A/C system installation kits are available.
  • High-velocity, rotatable blower for horizontal or vertical installation
  • Environmentally friendly R-410A refrigerant
  • Easy to use Dometic digital control and display
  • Plastic remote electrical box for convenience in mounting
  • Stainless-steel drain pan
  • Pre-installed return-air filter, easily removable and cleanable
  • Small, compact, space-saving design
TVE Series

Split Gas Air Conditioning - Evaporating Units

TVE Series
Dometic TVE evaporating units are based on the revolutionary engineering advancements of the Turbo self-contained air conditioning system. TVE evaporators work with Dometic Emerald R-410A condensers.
  • Available in 115V or 230V (50/60Hz)
  • Rust-free composite drain pan has anti-slosh, "positive flow" drain channels for no spills and rapid removal of condensate
  • Designed to be used with Emerald Series R-410A condensers
  • Vibration-isolation mounts reduce noise and vibration
  • Single adjustment screw for 270° of blower rotation
  • Rust-free composite drain pan has anti-slosh, "positive flow" drain channels for no spills and rapid removal of condensate
  • High-velocity fully-insulated blowers are rotatable up to 270 °
  • Vibration-isolation mounts reduce noise and vibration
  • Used with R-22 or R-417A condensers
TWCX Series

Modular Titanium Chillers

TWCX Series
A fully enclosed, high-performance reverse-cycle chiller that cools and heats, and is available in a wide range of models. Two control systems are available. The standard control is our proven Digital Diagnostic Control (DDC) that provides simple, single-stage operation. For multiplexed systems, the Tempered Water Logic Control (TWLC) with LCD screen is available. Depending on the configuration, additional cables, switches, sensors, or a display may be required.
  • Available in 230V 50Hz, 230V 60 Hz, 400V 50Hz, 400V 60 Hz 3PH
  • With DDC - Digital Diagnostic Control
  • Titanium condenser resists erosion and corrosion
  • Reverse-cycle unit cools and heats
  • Can be multiplexed for larger capacity
  • Includes flow switch, high- and low pressure switches, and inlet and outlet circulated water temperature sensors
  • Compact, enclosed design. High-efficiency rotary or scroll compressors
CHCG Chiller Series

Cool comfort for super yachts

CHCG Chiller Series
Versatile air conditioning for enhanced comfort on board super yachts and larger boats. The CHCG Chiller series' innovative, compact base allows individual modules to be multiplexed to meet precise capacity requirements.
  • Compact footprint for installation flexibility
  • Engineered to maximize the performance of R-410A, an environmentally safe refrigerant
  • Hot-gas bypass valve maintains heating performance in cold seawater
  • Up to six modules can be multiplexed for larger capacities
  • Thermodynamically-matched components assure maximum performance
  • Spiral-fluted cupronickel condenser coil provides maximum heat transfer and corrosion resistance
  • High-efficiency rotary or scroll compressors
VARC Series

Chilled Water Air Conditioning - Variable Capacity Chillers

VARC Series
Ideal for vessels 70 ft. (21 m) and over, chillers installed in the engine room circulate fresh water to air handlers installed in living and working areas. Titan models feature titanium condenser coils that resist erosion and corrosion and increase product lifespan.
  • Available in 230V 50HZ, 230V 60HZ
  • Variable capacity from 12000 BTU/h to 72000 BTU/h
  • Operates steadily at lower speeds to provide maximum efficiency
  • Electronic expansion valve for precise control of superheat
  • Select from three user-adjustable amp limits: Econo, Standard, or Boost
  • Compact footprint
  • Easy, flexible plumbing configurations with less depth needed
Durasea Air Conditioner

Built for tough marine conditions

Durasea Air Conditioner
The DuraSea Rooftop air conditioner is built to endure harsh marine environments. Install on a flat deck or rooftop and cool the area directly below. Requires no plumbing or ducting.
  • Robust yet lightweight design is corrosion-resistant
  • Easy to install: no plumbing or ducting required
  • High efficiency, low power consumption
  • High capacity cooler: 15,000 BTU/hr
  • Designed for rooftop or deck mount installation
  • Vibration-free operation
  • Three-speed blower
Cuddy II Series

Self-Contained Air Conditioning

Cuddy II Series
Ideal for sailboats and powerboats, it can be operated directly from batteries or used dockside with a suitable battery charger. It provides 3,500 BTU of cooling capacity and draws only 30 amps (without circulating pump).
  • Compact design is ideal for small cabins, sailboats, and powerboats
  • Low-energy: 12 V DC-powered air conditioning system
  • Provides 3,500 BTUs of cooling power
  • Under voltage protection at 10.5 V
  • Dependable and easy to install
  • Stainless-steel insulated base pan
  • High-performance evaporator coil
Air Cooled Air Conditioning

Robust construction

Air Cooled Air Conditioning
  • Compact, lightweight, and easy to install
  • Air-cooled - no plumbing required
  • Durable corrosion-resistant coating
  • Enhanced fin design and rifled tubing for maximum capacity
  • Control circuitry monitors and protects the unit
Split Gas Air Conditioning

Split Gas Air Conditioning
Dometic's innovative evaporating units harness and maximize the impressive performance of refrigerant while meeting all international clean air standards.
  • Stands only 7.48 in. (190 mm) tall
  • Corrosion-resistant coating on the blower and housing increases service life
  • 304-grade stainless-steel drain pan gives durability
  • Low-profile, designed for height-restrictive installations
  • Ideal for flybridge, cockpit, and on-deck installations
  • Service ports on refrigerant lines and base valves give easy access
  • Vibration isolation mounts minimize compressor noise
  • Environmentally safe R-417A refrigerant
  • Electrical box can be mounted remotely
  • Condensate drain pan with front and rear drain stems
  • High efficiency compressors function well at lower
  • Corner mounting brackets for easier installation
  • Service ports on refrigerant lines and base valves give easy access
  • Vibration isolation mounts minimize compressor noise
  • Environmentally safe R-417A refrigerant
  • Electrical box can be mounted remotely
  • Condensate drain pan with front and rear drain stems
  • High efficiency compressors function well at lower
  • Corner mounting brackets for easier installation
  • Ideal as drop-in replacements for Dometic MTC R-407C units
  • Hot gas bypass valve maintains heating performance in cold seawater
  • Wire harness with polarized plug for easy electrical connections
  • Thermal expansion valves optimize performance
  • Integrated loop-water strainer and flow switch

Clear all 

Select items to compare Compare 

Selected filters
Application
Input voltage (AC)

Air Conditioners for Marine Applications - What You Need to know

Whether you are sailing for a day or a year, your boat needs to have a dependable air conditioner in order to keep you cool and comfortable. On the open sea, ambient temperatures can be stifling. When combined with the humidity, your body may not be able to cool itself. That is where our high-quality marine air conditioners come into the picture. Our world leading brand includes a variety of models well-suited to keeping you comfortable on your yacht.

How to Find the Best Marine Air Conditioner

There are several important factors you will need to consider when choosing a marine AC unit. The air conditioner's capacity, energy consumption, noise level and features may play a role in your decision. Not all air conditioners are compatible with all sizes and types of boats. These tips will help you make the right decision when shopping for a Dometic marine air conditioner.

Capacity Is Important for Marine AC

Different air conditioners have different cooling capacities. You need to match the size of the indoor space you want cooled with the air conditioner's capacity. Our air conditioners deliver 4,000 to 72,000 BTU of cooling power per hour and are 27 percent more energy efficient than similarly sized models from other companies.

Innovative Features in Our Marine AC Units

We use state-of-the-art engineering in our marine air conditioners. From the environmentally-friendly refrigerant R-410A to our innovative solutions that reduce vibration in the living spaces, you can count on our air conditioners to maintain a comfortable indoor climate, work efficiently and take up a minimal amount of space. Some features include rust-free drain pans, hermetically sealed units and vibration isolation mounts.

Why Choose Dometic?

Our marine AC systems are old in more than 100 markets. Many world-renowned yacht and sailing manufacturers choose our products for interior climate control. Our products require minimal maintenance and are engineered to last in the harsh marine environment. The housing and components resist corrosion from saltwater and withstand temperatures of up to 140 degrees Fahrenheit.

How Much Power Do Marine Air Conditioners Need?

We manufacture different sizes of air conditioners for marine needs. They require from 115 volts at 60 Hz to 230 volts at 50 Hz. It is important to verify that your boat's battery can consistently deliver this level of power to the air conditioner.

Do Marine AC Units Take Up a lot of Space?

We understand that interior space is at a premium on all types of boats. We have engineered our marine air conditioning systems to be as compact as possible. They mount in line with the interior panels and conserve space. The tubing can be run inside of the interior walls or along the ceilings. The electrical box and compressor units take up 25 percent less space compared to those made by other manufacturers.

What is Zoned Climate Control?

Zoned climate control allows you to set different temperatures for different parts of your boat. If one member of your party wants their cabin to be cool and another wants theirs to be several degrees warmer, zoned climate control makes this possible. We offer multiple zoned climate control air conditioners for marine applications. The condenser goes in the engine room, and the smaller and quieter evaporator units are wall-mount ed in the different zones. You can choose up to six zones in the setup.

Heating Functions on Dometic Marine Air Conditioners

Some of our marine AC units are effectively mini heat pumps. They can heat or cool a space. This is helpful for chilly nights and hot days. Our ECD and Turbo Series products offer both heating and cooling functions for marine applications.

JOIN THE DOMETIC EMAIL LIST FOR EXCLUSIVE DEALS