Steering Cables

Steering Cables
Dometic.Core.BL.Model.Asset?.Title
Rotary

Give your boat smooth steering control

Provides smooth reliable steering for many Dometic rotary steering helms. Single cable systems are suitable for most single station, single engine boats. Dual cable systems are recommended for boats 50-55 MPH.

  • Simple snap in connection for easy installation.
  • Trapped nut engine connection stays in place during cable routing.
  • Tightly controlled core to conduit fit to offer precise steering.
  • The outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration.
  • Output ends are constructed of stainless steel material for corrosion resistance.
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements.
  • Fits: SH5150P, SH4910P, SH4920P, SH5094-1P, SH91190P, SH91526P, SH91527P, SH91523-1P.

  • Simple snap in connection for easy installation.
  • Trapped nut engine connection stays in place during cable routing.
  • Tightly controlled core to conduit fit to offer precise steering.
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration.
  • Output ends are constructed of stainless steel material for corrosion resistance.
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements.
  • Direct replacement cable for Morse® 304411 and SeaStar Solutions SSC52XX Command 290 steering helm 292525.
Dometic.Core.BL.Model.Asset?.Title
Rack & Pinion

Give your boat smooth steering control

Traditional Dometic mechanical steering is still the choice for sterndrives, inboards and other power assisted applications. It’s just right for power steered boats in which No FeedBack™ systems are not required.

  • Old style XR-4 rack steering cable
  • Trapped nut engine connection stays in place during cable routing
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • Exceeds ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Fits on the old Dometic rack steering helms; SH5098P, SH5097P, SH91528 and SH91529. All of these helms are obsolete and no longer available.

  • Rack replacement cable for Morse 300619 only
  • Trapped nut engine connection stays in place during cable routing
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance.
  • Exceeds ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Use on Command 200 rack steering system helms; 300252, 300853, 310992, 310993, 910994, 310995. All of these helms are obsolete and no longer available.

  • Easy installation design from behind the dash means no dash modification when replaces other Dometic rack steering systems
  • Trapped nut engine connection stays in place during cable routing
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • Exceeds ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Fits: SH5210P, SH5230P, SH91610 and SH91630P helms

  • Dual cables minimize lost motion in the system
  • Trapped nut engine connection stays in place during cable routing
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • Exceeds ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Fits: SH5210P, SH5230P, SH91610 and SH91630P helms

  • Xtreme steering cable technology delivers incredible response and minimal lost motion
  • Trapped nut engine connection stays in place during cable routing
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements.
  • Fits: SH5210P, SH5230P, SH91610 and SH91630P helms
Dometic.Core.BL.Model.Asset?.Title
Jet Boat

Give your boat smooth steering control

Provides smooth reliable steering for many Dometic JBS jet boat steering helms. Single cable systems or optional dual cable system.

  • Jet boat steering cables for Jet boats up to 175HP, with SH5087P, SH5088P, SH91691P, SH91692P helms
  • Total cable travel 3.5 inches
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements

  • Jet Boat steering cable for the mini rack helm, SH5220P, SH91620P
  • Total cable travel 3.5 inches
  • Tightly controlled core to conduit fit to offer precise steering
  • The outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Specifically designed for BRP single cable engine jet boats

  • Jet Boat steering cable for the mini rack helm, SH5220P, SH91620P
  • Total cable travel 3.5 inches
  • Tightly controlled core to conduit fit to offer precise steering
  • The outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Specifically designed for Yamaha single cable engine jet boats

  • Jet Boat steering cable for the mini rack helm, SH5220P, SH91620P
  • Total cable travel 3.5 inches
  • Tightly controlled core to conduit fit to offer precise steering
  • The outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Specifically designed for BRP twin cable engine jet boats

Clear all 

Select items to compare Compare