Steering Cables

Steering Cables
Dometic.Core.BL.Model.Asset?.Title
Rotary


  • Simple snap in connection for easy installation.
  • Trapped nut engine connection stays in place during cable routing.
  • Tightly controlled core to conduit fit to offer precise steering.
  • The outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration.
  • Output ends are constructed of stainless steel material for corrosion resistance.
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements.
  • Fits: SH5150P, SH4910P, SH4920P, SH5094-1P, SH91190P, SH91526P, SH91527P, SH91523-1P.

  • Simple snap in connection for easy installation.
  • Trapped nut engine connection stays in place during cable routing.
  • Tightly controlled core to conduit fit to offer precise steering.
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration.
  • Output ends are constructed of stainless steel material for corrosion resistance.
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements.
  • Direct replacement cable for Morse® 304411 and SeaStar Solutions SSC52XX Command 290 steering helm 292525.
Dometic.Core.BL.Model.Asset?.Title
Rack & Pinion


  • Old style XR-4 rack steering cable
  • Trapped nut engine connection stays in place during cable routing
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • Exceeds ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Fits on the old Dometic rack steering helms; SH5098P, SH5097P, SH91528 and SH91529. All of these helms are obsolete and no longer available.

  • Rack replacement cable for Morse 300619 only
  • Trapped nut engine connection stays in place during cable routing
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance.
  • Exceeds ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Use on Command 200 rack steering system helms; 300252, 300853, 310992, 310993, 910994, 310995. All of these helms are obsolete and no longer available.

  • Easy installation design from behind the dash means no dash modification when replaces other Dometic rack steering systems
  • Trapped nut engine connection stays in place during cable routing
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • Exceeds ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Fits: SH5210P, SH5230P, SH91610 and SH91630P helms

  • Dual cables minimize lost motion in the system
  • Trapped nut engine connection stays in place during cable routing
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • Exceeds ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Fits: SH5210P, SH5230P, SH91610 and SH91630P helms

  • Xtreme steering cable technology delivers incredible response and minimal lost motion
  • Trapped nut engine connection stays in place during cable routing
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements.
  • Fits: SH5210P, SH5230P, SH91610 and SH91630P helms
Dometic.Core.BL.Model.Asset?.Title
Jet Boat


  • Jet boat steering cables for Jet boats up to 175HP, with SH5087P, SH5088P, SH91691P, SH91692P helms
  • Total cable travel 3.5 inches
  • Tightly controlled core to conduit fit to offer precise steering
  • Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements

  • Jet Boat steering cable for the mini rack helm, SH5220P, SH91620P
  • Total cable travel 3.5 inches
  • Tightly controlled core to conduit fit to offer precise steering
  • The outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Specifically designed for BRP single cable engine jet boats

  • Jet Boat steering cable for the mini rack helm, SH5220P, SH91620P
  • Total cable travel 3.5 inches
  • Tightly controlled core to conduit fit to offer precise steering
  • The outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Specifically designed for Yamaha single cable engine jet boats

  • Jet Boat steering cable for the mini rack helm, SH5220P, SH91620P
  • Total cable travel 3.5 inches
  • Tightly controlled core to conduit fit to offer precise steering
  • The outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
  • Output ends are constructed of stainless steel material for corrosion resistance
  • All Dometic SeaStar steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements
  • Specifically designed for BRP twin cable engine jet boats

Cancella tutto 

Seleziona i prodotti da confrontare Confronta