Dometic modulating DX evaporators are ductable cooling only (EMB) units with built-in refrigerant solenoid valves and high-efficiency blowers. Dometic modulating air conditioning systems allow up to five independent temperature-controlled zones giving maximum climate control flexibility (see spec sheet L–2366). The Dometic EMB 12,000 BTU/h - 230 V/60 Hz is designed to be installed low in a closet or cabinet, with supply air ducted to grills high in the cabin. All metal surfaces over which air passes are covered with insulating foam to reduce secondary condensation and noise. The condensate pan has an anti-slosh, antifungal foam lining and rubber mounting feet for noise and vibration control as well as easy installation. The high-efficiency blower can be rotated so the air can be discharged in different directions. The permanent split capacitor (PSC) motor is internal to the blower wheel and housing, which results in a quiet unit with excellent performance and speed control, especially when used with a Dometic SMX series control. An electrical junction box is included with the unit, and has a 3 ft. (1 m) wire harness so it can be mounted in an conveniently accessible location. EMB cooling units can be controlled locally with a mechanical switch assembly, SMX II microprocessor (SMX II power/logic box, control, and cables are sold separately), or the Q-Logic microprocessor system with Qht or Q3 display. Remote monitoring via the central boat monitoring system or Dometic’s Gateway network is possible with the Q-Logic control system and optional CAN-bus adapter board. Designed for use with Dometic RM modulating condensors.