Dometic EVAPS EBE
Evaporator Unit

Compact EBE split evaporators for boats are draw-through, ductable cooling units with reverse cycle heating. Featuring a rotatable, high-efficiency blower in which the motor is concealed to save space.
  • Space-saving
    Compact
  • Flexible
    Rotating blower
  • Reduced noise
INTERESTED IN THIS PRODUCT?
Contact us for an individual offer
Recursos
The Dometic EBE is designed for installation low in a closet, cabinet, or other enclosed space, with discharge air ducted to one or more grilles high in the cabin. EBE units can be used with a combination of plenums and flexible duct, or built-in ductwork may be used.
Dometic EVAPS EBE
... e mais
    • Compact ductable cooling or heating units save space
    • Rotating blower allows you to direct the airflow as needed
    • Vibration-isolation mounting reduces noise and vibration
    • Insulated condensate pan with anti-slosh, anti-fungal foam lining
    • High-efficiency evaporator coil
    • Available with electric heat (Dometic EBHE models)
    • Designed to be used with Emerald series R-410A condensers

The new standard in high-performance evaporators

The Dometic EBE 36,000 BTU/h - 208-230 V/50-60 Hz/1-Ph is designed for installation low in a closet, cabinet, or other enclosed space, with discharge air ducted to one or more grilles high in the cabin. Vibration-isolation mounting is built into each EBE unit to reduce noise and vibration. The PSC blower is supported by a sturdy aluminum bracket with isolation grommets to reduce noise and vibration. The blower's internal motor housing reduces the overall unit depth for easier installation and promotes quiet operation. The drain pan and blower housing are covered with insulating foam which further reduces noise and secondary condensation. The "positive flow" drain pan has an anti-slosh, antifungal foam lining. Two 1/2 in. (13 mm) drains are located on the blower side of the drain pan to effectively removely condensate.

Especificações

Número da SKU 9108690473 
Modelo EVAPS EBE Series 
Modelo na etiqueta EBE36-230V 10"MR 
Descrição do produto Evaporator Unit 
Dimensões - Profundidade do produto 452 mm
Dimensões - Altura do produto 566 mm
Dimensões - Largura do produto 528 mm
Peso líquido 18.94 kg
Tensão de entrada (CA) 230 V
Frequência de entrada 50/60 Hz
Proteção obrigatória mínima do circuito de CA 10.00 A
Proteção obrigatória máxima do circuito de CA 10.00 A
Potência de refrigeração (ISO 5151) 36000 W
Consumo máximo de energia para refrigeração 3.70 A
Dimensões - Profundidade do pacote 653 mm
Dimensões - Altura do pacote 660 mm
Dimensões - Largura do pacote 914 mm
Peso do pacote 25.63 kg