Dometic EVAPS EBE
Evaporator Unit

Compact EBE split evaporators for boats are draw-through, ductable cooling units with reverse cycle heating. Featuring a rotatable, high-efficiency blower in which the motor is concealed to save space.
  • Space-saving
    Compact
  • Flexible
    Rotating blower
  • Reduced noise
INTERESTED IN THIS PRODUCT?
Contact us for an individual offer
Функции
The Dometic EBE is designed for installation low in a closet, cabinet, or other enclosed space, with discharge air ducted to one or more grilles high in the cabin. EBE units can be used with a combination of plenums and flexible duct, or built-in ductwork may be used.
Dometic EVAPS EBE
...а также
    • Compact ductable cooling or heating units save space
    • Rotating blower allows you to direct the airflow as needed
    • Vibration-isolation mounting reduces noise and vibration
    • Insulated condensate pan with anti-slosh, anti-fungal foam lining
    • High-efficiency evaporator coil
    • Available with electric heat (Dometic EBHE models)
    • Designed to be used with Emerald series R-410A condensers

The new standard in high-performance evaporators

The Dometic EBE 30,000 BTU/h - 208-230 V/50-60 Hz/1-Ph is designed for installation low in a closet, cabinet, or other enclosed space, with discharge air ducted to one or more grilles high in the cabin. Vibration-isolation mounting is built into each EBE unit to reduce noise and vibration. The PSC blower is supported by a sturdy aluminum bracket with isolation grommets to reduce noise and vibration. The blower's internal motor housing reduces the overall unit depth for easier installation and promotes quiet operation. The drain pan and blower housing are covered with insulating foam which further reduces noise and secondary condensation. The "positive flow" drain pan has an anti-slosh, antifungal foam lining. Two 1/2 in. (13 mm) drains are located on the blower side of the drain pan to effectively removely condensate.

Технические характеристики

Артикул (SKU) 9108690472 
Модель EVAPS EBE Series 
Модель, указанная на этикетке EBE30-230V 10"MR 
Описание изделия Evaporator Unit 
Размеры: глубина изделия 381 mm
Размеры: высота изделия 559 mm
Размеры: ширина изделия 528 mm
Вес нетто 16.33 kg
Входное напряжение переменного тока 230 V
Частота входного напряжения 50/60 Hz
Необходимая защита цепи переменного тока (мин.) 3.00 A
Необходимая защита цепи переменного тока (макс.) 5.00 A
Мощность охлаждения (ISO 5151) 30000 W
Максимальное потребление тока в режиме охлаждения 1.70 A
Размеры: глубина упаковки 559 mm
Размеры: высота упаковки 711 mm
Размеры: ширина упаковки 635 mm
Вес посылки 19.05 kg