Truck Blind Spot Camera

Life Saver - no more blind spots

Professional solution with easy installation

CAM1000 is a Blind Spot Assistant System for trucks with intelligent object detection feature. Only moving objects are indicated. The driver gets a visual and acoustic sign at a critical situation to avoid heavy accidents with cyclists and pedestrians. The system allows a full video picture during normal drive. Easy installation reduced to a minimum by simply connecting the camera to the system monitor – no blackbox or CAN bus and sensor connection is needed.

CAM1000 fulfils the requirement of the German BMVI
to gain a financial support (only Germany at the moment) and also applied the required ABE.

Your time to comply

From July 1, 2020, there will be a requirement by the German law for the installation of a blind spot camera system for trucks up to 25,25 m length - however, initially only for new vehicles.
There is a two-year transition period for retrofitting older trucks especially in Germany. BVS71000 fulfils the requirement of the German BMVI to gain a financial support and applied the required ABE.

Experience safer driving with PerfectView CAM1000

CAM 1000 is a blind spot camera assistant system for trucks with an intelligent object detection feature where only moving objects are detected. The driver receives a visual and acoustic alert in critical situations to avoid heavy accidents with cyclists and pedestrians. The assistant system allows a full video picture during normal drive.

Avoid accidents with cyclists or pedestrians

Active detection of moving objects

Video image of the related area

Active indication (visual/acoustic)

CAM1000

The perfect blind spot camera for trucks.

  • Installation limited to a minimum
  • No calibration needed – only adjust the camera
  • No additional blackbox or sensor needed
  • Giving alert only when moving objects are detected in blind spot area
  • System works from 0 to 30 km/h with GPS based accuracy
  • Night mode with LED illumination
  • ECE R10 approved/ISO16750 compliant
  • 12V/24V compatible
Contact us
CAM1000

BVS71000

CAM1000 + M 75LX AHD

Full blind spot assistant system including 7" LCD Display.

  • Installation limited to a minimum
  • No calibration needed – only adjust the camera
  • No additional blackbox or sensor needed
  • Giving alert only when moving objects are detected in blind spot area
  • System works from 0 to 30 km/h with GPS based accuracy
  • 7" LCD monitor with high definition technology
  • Night mode with LED illumination
  • Fulfills requirement of the German BMVI to gain financial support (Germany only)
  • Applied the required ABE
  • ECE R10 approved/ISO16750 compliant
  • 12V/24V compatible
Contact Us
CAM1000

More than 25 years of experience in the development of camera systems have been brought into the project “blind spot assistant”

”The Dometic Blind Spot Assistant System warns the drivers of vehicles when cyclists or pedestrians appear in the blind spot area on the right hand side next to their vehicle. The development by the Competence Center Electronic Emsdetten took place in close coordination with TÜV and affected drivers of trucks. The aim was amongst others to achieve a high acceptance by the drivers and to guarantee high functionality even under adverse circumstances. The result is the CAM1000 – intelligent to use, compact in the design, easy to assemble and universally retrofittable.”

– Martin Henseleit, Product Developer Safety & Security and enthusiastic cyclist

Formulár žiadosti o podporu

TIPY NA VYPLNENIE TOHTO FORMULÁRA: Vyplňte čo najviac polí. Čím viac podrobností vyplníte, tým rýchlejšie vám poskytneme presnú odpoveď. * Povinné údaje

ReCaptcha did not confim your submition as valid

Formulár je dočasne zamknutý

Using HTML tags in text inputs is not allowed