Dometic EVAPS EBE
Evaporator Unit

Compact EBE split evaporators for boats are draw-through, ductable cooling units with reverse cycle heating. Featuring a rotatable, high-efficiency blower in which the motor is concealed to save space.
  • Space-saving
    Compact
  • Flexible
    Rotating blower
  • Reduced noise
art.nr : 9108690473 Visit support page + FAQ
Features
The Dometic EBE is designed for installation low in a cupboard, closet, cabinet or other enclosed space, with discharge air ducted to one or more grilles high in the cabin. EBE units can be used with a combination of plenums and flexible duct, or built-in ductwork may be used.
Dometic EVAPS EBE
...and more
    • Compact ductable cooling or heating units save space
    • Rotating blower allows you to direct the airflow as needed
    • Vibration-isolation mounting reduces noise and vibration
    • Insulated condensate pan with anti-slosh, anti-fungal foam lining
    • High-efficiency evaporator coil
    • Available with electric heat (Dometic EBHE models)
    • Designed to be used with Emerald series R-410A condensers

The new standard in high-performance evaporators

The Dometic EBE 36,000 BTU/h - 208-230 V/50-60 Hz/1-Ph is designed for installation low in a closet, cabinet, or other enclosed space, with discharge air ducted to one or more grilles high in the cabin. Vibration-isolation mounting is built into each EBE unit to reduce noise and vibration. The PSC blower is supported by a sturdy aluminum bracket with isolation grommets to reduce noise and vibration. The blower's internal motor housing reduces the overall unit depth for easier installation and promotes quiet operation. The drain pan and blower housing are covered with insulating foam which further reduces noise and secondary condensation. The "positive flow" drain pan has an anti-slosh, antifungal foam lining. Two 1/2 in. (13 mm) drains are located on the blower side of the drain pan to effectively removely condensate.

Specifications

SKU number 9108690473 
Model EVAPS EBE Series 
Model on label EBE36-230V 10"MR 
Product Description Evaporator Unit 
Dimensions product depth 452 mm
Dimensions product height 566 mm
Dimensions product width 528 mm
Net weight 18.94 kg
Input voltage (AC) 230 V
Input frequency 50/60 Hz
Required AC circuit protection min 10.00 A
Required AC circuit protection max 10.00 A
Cooling capacity (ISO 5151) 36000 W
Current consumption max cooling 3.70 A
Dimensions parcel depth 653 mm
Dimensions parcel height 660 mm
Dimensions parcel width 914 mm
Parcel weight 25.63 kg