The Dometic SeaStar Rack SSC124 type cable is an old style XR-4 rack steering cable.
21
Old style XR-4 rack steering cable
Trapped nut engine connection stays in place during cable routing
Tightly controlled core to conduit fit to offer precise steering
Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration
Output ends are constructed of stainless steel material for corrosion resistance
Exceeds ABYC safety standards and ISO/IMCI/NMMA certification requirements
Fits on the old Dometic rack steering helms; SH5098P, SH5097P, SH91528 and SH91529. All of these helms are obsolete and no longer available.
VarningCancer eller reproduktionsskada www.P65Warnings.ca.gov
When replacing a cable, measure twice and order once. If possible, find the part number stamped on the plastic jacket of the old cable. For rack cables, if you removed the old cable, measure plastic cable jacket in inches, add 30 inches and if it does not end on a foot, then round up to the next foot. Order that length cable.