Description
- Single Point Inflation AirFrame technology
- Weathershield™ Pro material
- Dual-Pitch™ Roof System
Specifications
SKU: 9120000022
| Model | MobilAirProCaravan |
|---|---|
| Scope of delivery | 1 awning; 1 curtain set; 1 2.2L pump; 1 draught skirt; 1 peg pack; 1 manual; 1 carry bag |
| Product Description | Inflatable caravan awning, 3.95 m width |
| Dimensions product depth, [mm] | 2500 |
|---|---|
| Dimensions product height, [mm] | 2390 |
| Dimensions product width, [mm] | 3950 |
| Connection height min, [cm] | 239 |
| Connection height max, [cm] | 239 |
| Net weight, [kg] | 26.10 |
| Mount Position | VehicleSide |
|---|---|
| Vehicle Type | Caravan |
| Frame Type | Inflatable |
| Dimensions parcel depth, [mm] | 990 |
|---|---|
| Dimensions parcel height, [mm] | 330 |
| Dimensions parcel width, [mm] | 560 |
| Parcel weight, [kg] | 29.10 |
Highlights
Floor Plan
Generous dimensions maximise the liveable space of your pitch
Single Point Inflation
Single Point Inflation awnings inflate from just one external inflation point
Integral Inflatable Canopy
Integral inflatable wet weather canopy with apex mesh ventilation
Dual-Pitch™ Roof System
Increases headroom, ensures effective wind deflection and efficiently sheds water
Zip-out Front Panels
Front panels can be zipped out to reduce weight and to open the awning up
Weathershield™ Pro
Weathershield™ Pro double coated polyester fabric
Fully waterproof
Tested to withstand 200 liters of water per hour per sqm, which exceeds London's average of 70 liters per hour in its wettest month
1 question
Dometic AirPoles do not need any maintenance but should be protected from damage during storage. Damage due to improper use, wind damage or neglect is not covered under the warranty. Have any damage repaired at a Kampa Dometic authorized repair centre at the first opportunity.
Over time the AirPoles may twist slightly. This is primarily caused by the awning being under-inflated, however it can also occur during setup or take-down. This can be resolved with some slight adjustment of the tubes.
Isolation valves on AirFrames may need to be re-seated over time.