Main Content
Buy Now Pay Later with Klarna
Dometic SeaStar SSC130
Product images are for illustrative purposes and may differ from the actual product

Dometic SeaStar SSC130

Cable replacement, Command 200, available in many lengths

The Dometic SeaStar Rack SSC130 type cable is a replacement cable for Morse 300619 cable. This cable can be used on the Command 200 rack steering helm.

Sold in our dealer networkArt nr: 9130004779
Your Configurations
Dimensions product length, [']

8

Rack replacement cable for Morse 300619 only

Trapped nut engine connection stays in place during cable routing

Tightly controlled core to conduit fit to offer precise steering

Outer jacket is constructed with HDPE, a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration

Output ends are constructed of stainless steel material for corrosion resistance.

Exceeds ABYC safety standards and ISO/IMCI/NMMA certification requirements

Use on Command 200 rack steering system helms; 300252, 300853, 310992, 310993, 910994, 310995. All of these helms are obsolete and no longer available.

SKU number

9130004779

Model

SSC130

Legacy Factory Item Number

SSC13008

Product Description

Cable Replace Command 200, 8'

Dimensions product height, ["]

20

Dimensions product width, ["]

3 1/4

Dimensions product length, [']

8

Net weight, [lbs]

7.74

Wire Length, [']

27

Dimensions parcel height, ["]

20

Dimensions parcel width, ["]

3 1/4

Parcel weight, [lbs]

7.74

WARNING

WARNINGCancer or Reproductive Harm www.P65Warnings.ca.gov

How to measure steering cables

How to measure steering cables

When replacing a cable, measure twice and order once. If possible, find the part number stamped on the plastic jacket of the old cable. For rack cables, if you removed the old cable, measure plastic cable jacket in inches, add 30 inches and if it does not end on a foot, then round up to the next foot. Order that length cable.

Not the one for you?

Discover similar products